The Sentinel Kinetic Cooker Hood is a high duty wall hung MVHR unit with an integrated telescopic cooker hood, super efficient DC motors for extremely quiet running, maximum product life with minimal running costs.
Designed to fit in a 600mm aperture above the hob ideal for flats and medium sized properties with a kitchen and up to 5 additional wet rooms. This 'whole house' Mechanical Ventilation & Heat Recovery system combines air supply and extraction in one unit.
Sentinel Kinetic Coooker Hood features include:
Solarcrest supply, install and commission MVHR systems throughout the UK. For a free design and quote please send a plan of your property to firstname.lastname@example.org or call 0845 833 0388.
The efficiency of the Vent-Axia Sentinel Kinetic range has been independently verified by the Building Research Establishment (BRE). All units offer between 87% and 92% heat recovery and are listed in the SAP Appendix Q database. The Sentinel Kinetic units are ideal for new build properties required to meet CfSH level 3 or above.
All Sentinel Kinetic units are compliant under Part F & L of the 2010 Building Regulations.
The sentinel kinetic Cooker Hood has been specifically designed to fit in a 600mm aperture above a hob. With only a 300 mm depth this unit will fit within most kitchen cupboards. Please check the installation manual for dimensions.
The telescopic hood incorporates two flat removable metal grease filters, low energy light bulbs and is available with White or Brushed Aluminium front trim. The hood contains an internal damper in accordance with BRE Digest 398 and is connected to the heat recovery unit by a galvanised steel duct with access for cleaning. When the hood is opened, the heat recovery unit goes onto boost speed and the summer bypass automatically opens to prevent cooking by-products entering the heat recovery cell. As an additional safety feature, the duct also contains a thermal cut-out fuse which turns off the MVHR unit in the event of excessive temperature in the airway.
All Sentinel Kinetic units feature automatic frost protection. If the outdoor temperature drops below 0C the air intake is disabled and the unit serves as an 'extract only' system until the weather improves.
An automatic summer bypass is available for the Sentinel Kinetic unit as a factory fitted optional extra or can be installed at a later date. If the outdoor air temperature exceeds the indoor air temperature the heat recovery function is automatically disabled. Under these conditions the unit provides fresh filtered air throughout the property to help reach a pre-set "Comfort Temperature". When the inside air temperature reaches the "Comfort Temperature" the summer bypass is deactivated.
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet-room. Night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.
The Sentinel Kinetic models have 2 fully adjustable air flow speeds and a purge setting - maximum. On the front of the unit is a digital controller that can be used to pre-set the speeds to any required air flow within the performance range. These settings can be activated on the unit itself or via a wired/wireless remote. This allows for a simple and accurate commissioning in addition to user-friendly controls. Solarcrest provide a nationwide supply, installation and commissioning service with BPEC certified installers. We also provide commissioning only, required under 2010 regs, if you prefer to install the system yourself. In which case we can provide installation guidance by telephone and email. Don't forget, draughty trickle vents and airbricks will not be necessary with an MVHR.
Unlike many MVHR units the air filters in the Sentinel Kinetic range only require an annual inspection and clean, normally with a vacuum cleaner. More frequent inspection post- building work is prudent as the filters are likely to pick up more dust than normal. The Sentinel Kinetic range has a unique filter design that can be easily removed from the front panel (even within restricted spaces) and can be upgraded to F5 pollen filters if you suffer from hay fever. Other than the filter inspection the MVHR is a fit and forget item. All Vent- Axia units come with a 5 year warranty for added peace of mind
Solarcrest will assess your floor plans and ventilation requirements in order to recommend the most appropriate MVHR system. We'll then provide accurate budget costs for the supply, installation and/or commissioning of the system to current building regs. Subject to an initial deposit we release our proposed ducting design and air flow specification for consideration by your building inspector. Subject to approval we can normally have the complete system on site within a week.
If you need any further help or advise with your MVHR purchase please don't hesitate to
call 0845 833 0388 or email