Your Order..
0 Product(s) in cart
Total 0.00
We now accept Paypal
Call for help
with Eco Retrofit
  Solarcrest provide a one-stop-shop for complete eco retrofit. If you don't know where to start please call us
Eliot Warrington, Founder
Vent-Axia HR200WK
203sqm wet-room dMVHR 250mm square

The HR200WK is a single room wall mounted dMVHR suitable for large domestic kitchens or utilty rooms with a floor area up to 203sqm. The unit is also suitable for light commercial applications.

Designed to be a low carbon replacement or alternative to traditional intermittent extract fan with the benefits of recovering heat from the extracted air. The HR200WK features include:

  • 2 year Vent Axia warranty
  • Up to 75% heat recovery
  • Ultra quiet with sound levels as low as 19dB(A)
  • Low energy, long life DC fan motors
  • 3 speed motor trickle, normal and boost
  • Rotary controller to switch between speeds
  • Extension sleeve for walls up to 550mm (optional)
  • Manufactured in the UK to high specification

Vent-Axia HR25 Solo PlusDownload the HR200WK brochure


free MVHR design serviceSolarcrest supply, install and commission MVHR systems throughout the UK. For a free design and quote please send a plan of your property to sales@solarcrest.co.uk or call 0845 833 0388.

Our price: 436.68 each
(524.02 inc.)
Product details ..
Vent-Axia HR200WK
203sqm wet-room dMVHR 250mm square


Heat Exchanger

The highly efficient, ploymeric heat exchanger bcube is washable. The compact cube interleaves outgoing moist warm air with incoming fresh air and allows the heat from one to warm the other without the two air streams mixing. Up to 75% of the heat, which would otherwise be lost, is transferred to the intake air, ensuring energy saving balanced ventilation. The incoming air is tempered when it passes over the heat exchanger providing the room with drier air, therefore the humidity level drops due to the constant air movement preventing the air inside the room from becoming saturated with moisture. Energy is saved on room heating with no power being used by the cube itself.


Maintenance

Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. Therefore to ensure peak performance, the appliance should be cleaned regularly. Filters should be replaced every six months or as conditions necessitate. Quick release grilles give instant access to the integral washable filters. The heat exchanger and grille should be washed in warm soapy water every twelve months or as conditions necessitate


Installation

The HR200WK fits through walls up to 335mm thick requiring a fixing hole 250mm square. The internal grille has washable, polymeric foam supply and extract filters. Only the neat internal twin grille is visible from the room. A wall extension sleeve is available for wall up to 550mm thick. Please check the installation manual for dimensions.


FREE DESIGN SERVICE

Solarcrest will assess your floor plans and ventilation requirements in order to recommend the most appropriate MVHR system. We'll then provide accurate budget costs for the supply, installation and/or commissioning of the system to current building regs. Subject to an initial deposit we release our proposed ducting design and air flow specification for consideration by your building inspector. Subject to approval we can normally have the complete system on site within a week.

If you need any further help or advise with your MVHR purchase please don't hesitate to call 0845 833 0388 or email sales@solarcrest.co.uk