Your Order..
0 Product(s) in cart
Total 0.00
We now accept Paypal
Call for help
with Eco Retrofit
  Solarcrest provide a one-stop-shop for complete eco retrofit. If you don't know where to start please call us
Eliot Warrington, Founder
Vortice HR200 Evo
Heat recovery ventilation for 1-3 bed homes

The VORT HR 200 Mechanical Ventilation & Heat Recovery unit (MVHR) offers an affordable “whole house” ventilation system providing effective ventilation, air cleaning and over 90% heat recovery in one compact unit.

Product features include:

  • Up to 93% heat recovery
  • Appendix Q eligible
  • Compact design to fit standard kitchen wall unit
  • Frost protection
  • Lowers heating requirements of the dwelling
  • Remote control unit for wire-free installation (Optional)
  • Very low energy DC brushless motors
  • Horizontal and vertical mount


Solarcrest design, supply, install (optional) & commission MVHR systems for self-builders & retrofitters around the UK. Independent from any one manufacturer we'll provide the ultimate hybrid system that's super quiet, efficient & effective.


Solarcrest design, supply, install (optional) & commission MVHR systems for self-builders & retrofitters around the UK. Independent from any one manufacturer we'll provide the ultimate hybrid system that's super quiet, efficient & effective.

Vortice HR200 EvoDownload the Vort HR200 brochure
MVHR heat recovery ventilation quoteGet a 'complete system' estimate
call us for an MVHR heat recovery ventilation quoteEmail plans to sales@solarcrest.co.uk
call us for an MVHR heat recovery ventilation quoteCall 01625 423020 for MVHR help


Our price: 1,067.26 each
(1,280.71 inc.)
Product details ..
Vortice HR200 Evo
Heat recovery ventilation for 1-3 bed homes

Designed for properties with up to 3 bedrooms or 160 square metres total floor area the HR200 unit creates a low pressure air flow that pulls stale/damp air from bathrooms, WC’s, Utilities, kitchens and cellars, at the same time feeding fresh, pre-warmed air into living spaces and bedrooms. Thanks to its super efficient motors the system consumes less electricity than a light bulb on normal operation.

The Vortex HR200 removes moisture, stale air and odours from your property without removing the heat. So with over 20% of your space heating energy typically lost through natural ventilation, the system good for your health, the environment and your wallet.

The HR200 system will exceed building regulations for ventilation in buildings up to 160 square metres. Driven by two high performance low consumption DC motors located on anti vibration mounts the HR200 offers a low energy low noise solution. Running in fully automatic mode the environmental conditions inside the dwelling are maintained constant, while energy consumption is significantly reduced.

Appendix Q eligibility

The HR200 with its low energy DC motors and innovative design has been independently tested by the Building Research Establishment (BRE) to the appropriate SAP Appendix Q test methodology and is Appendix Q eligible in all configurations from kitchen+1 wet room to kitchen+4 additional wet rooms.

Compact Size

The HR200 unit can be located where space is limited i.e. loft space or hidden inside a kitchen cupboard due to the compact size of the unit (595x549x292mm, including space for mains unit)

Frost protection

When the temperature and relative humidity of both indoor and outdoor air streams are at a condition whereby frost may form on the heat exchanger surface, the frost protection system opens automatically to correct the situation.

Filters

The unit includes two G3 filters, fitted inside the unit near the heat exchanger. These are easily accessible by removing the front panel. Their function is to protect impurities entering both the dwelling and the heat exchanger.

RF remote control (Optional)

Each of the functions of the unit is controlled by the radio frequency (RF) remote control. The 2 way transmission controller allows the unit to be switched on, off and adjusted by the installer without the need for return visits to the unit from each room. The home occupant also has control via the remote control of selected functions

Noise suppression

The unit is supplied with a silencer to minimise sound emission.

Heat exchanger

Counter flow type, made of PE (polythene)

External casing

Mild steel, powder coated white

Fan motors

DC brushless type, in order to combine high performances and very low consumptions, located on anti vibration mounts.

Spigots

Made of PP (Polypropylene).

Download Vort HR200 Brochure