Natural hemp thermal insulation panels with an R value as high as 2.5. Length 1.2m available in 50, 75 or 100mm thickness, 380 or 580mm width

Natural wool thermal insulation with an R value as high as 0.4. Available in 75mm or 100mm thickness, 400mm or 600mm width

test

The Microshield air barrier creates a “virtual door” by re-circulating ambient air across the opening to create up to a 90% seal.

With a certified 'R' value of 4.64 new SuperFOIL SF60 is the thickest multi-layer foil on the market. A 100mm foil & thermofoam quilt equivalent to 205mm of fibreglass wool, SF60 is the easy way to reach code level 3 and above

With a certified 'R' value of 3.564 a 60mm layer of SuperFOIL SF40 provides exceptional insulation in the minimum space

With an 'R' value 2.218 SF19 is a great value multi-foil, ideal for topping up your existing roof insulation.

SFUF multi-foil insulation is designed to supplement insulation
in solid & suspended timber floors. Only 6mm total thickness!!

A general purpose thermal vapour barrier for walls, floors & roofs to resists the passage of moisture & improve airtightness

SuperFOIL sticking tape for joining all Multi-foil products.
Roll size 20m x 100mm. Pack contains 3 rolls

Revolutionary new design to eliminate draughts from your letterbox. The more the wind blows the tighter it closes. Easy to retrofit in 5 minutes

Heat recovery ventilation unit for 3-5 bed homes, up to 92% efficient, SAP appendix Q eligible, automatic frost protection, boost & summer by-pass

Heat recovery ventilation unit for 1-3 bed homes, up to 93% efficient, SAP appendix Q eligible, compact size, near silent operation

Air intake pre-heating unit with automatic function to protect against frosting in extreme temperatures.

External filter designed to simplify maintenance of the Vortice MVHR range

Environment sensors to boost the airflow if high humidity, temperature, smoke or pollutants are detected

An ultra low energy continuous extractor fan with manual boost function, suitable to install through walls, ceilings or with ducting

An ultra low energy continuous extractor fan with humidistat controlled boost, suitable to install through walls, ceilings or with ducting

Wall mounted MVHR unit. Up to 92% Heat Recovery, Very Low Fan Power. SAP Appendix Q Eligible. Up to 52 l/s

Wall mounted MVHR unit. Up to 91% Heat Recovery, Very Low Fan Power. SAP Appendix Q Eligible. Up to 110 l/s

Loft mounted MVHR unit. 92% Heat Recovery, Lowest Specific Fan Power on the market. SAP appendix Q. Up to 64 l/s

Loft mounted MVHR unit. 91% Heat Recovery, Lowest Specific Fan Power on the market. SAP appendix Q. Up to 113 l/s

Loft mounted MVHR unit. 91% Heat Recovery, Lowest Specific Fan Power on the market. SAP appendix Q. Up to 132 l/s

Low profile MVHR unit. 70% Heat Recovery with low energy DC motors. SAP appendix Q. Up to 75 l/s

Above the cooker MVHR unit. 70% Heat Recovery with low energy DC motors. Up to 54 l/s

MVHR Cookerhood unit. 117l/s extraction capacity through tangential motor.

Environment sensors to boost the airflow if high humidity or movement is detected

A low energy humidistat controlled extractor fan with built-in heat recovery up to 86% efficient. Improves air quality in rooms up to 25m sq.

A low energy extractor fan with built-in heat recovery system up to 86% efficient. Improves air quality in rooms up to 25m sq.

Replacement air filter for Kair KHRV150 single room heat recovery extractor fan.

Anti-tamper screw/drill driver bit required for KHRV150 installation.

Extension kit for installing the Kair KHRV150 unit through walls greater than 356mm thickness.

White LED light bulbs similar to a 60W only 90% less electricity
Available in Warm White (400lm) or Bright White (450lm)
Available in full size Bayonet Cap (BC) or ES27 screw fittings

White LED light bulbs similar to a 40W only 90% less electricity
Available in Warm White (380lm) or Bright White (400lm)
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Warm White LED light bulbs similar to a 30W only 90% less electricity
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Bright White LED light bulbs similar to a 20W only 87.5% less electricity
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Warm White LED light bulbs similar to a 10W only 90% less electricity
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Warm White LED light bulbs similar to a 40W only 80% less electricity
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Warm White LED light bulbs similar to a 60W only 85% less electricity
Available in full size Bayonet Cap (BC) or ES27 screw fittings

Warm White LED candle bulbs similar to a 25W only 90% less electricity
Available in full size Bayonet Cap (BC) or ES14 screw fittings

Warm White LED GU10 bulbs similar to a 20-35W only upto 95% less electricity

White LED GU10 bulbs to replace 20-35M only 90% less electricity

Warm White LED MR16 bulbs similar to a 20-35W only upto 95% less electricity

White LED MR16 bulbs to replace 20-35M only 90% less electricity

15W 2D LED Emergency Lights

15W Round 2D LED and Fitting Replaces existing 28W 2D fluorescent

20W LED downlight to replace 28W CFL in 150mm diameter fitting

20W LED downlight to replace 2x 18W CFLs in 200mm diameter fitting

25W LED Ceiling Panel to replace 3 x 18W flourescents

25W LED Ceiling Panel to replace 3 x 18W flourescents with PIR

25W LED Ceiling Panel to replace 3 x 18W fluorescents. Includes Emergency Power Pack

36W LED Ceiling Panel to replace 4 x 22W flourescents

36W LED Ceiling Panel to replace 4 x 22W fluorescents with PIR

36W LED Ceiling Panel to replace 4 x 22W fluorescents with PIR and Emergency Power Pack

2ft LED light tube similar to 18W fluorescent only 55% less electricity
T8, 26mm diameter, G13 fittings, 3 year factory warranty

3ft LED light tube similar to 30W fluorescent only 63% less electricity
T8, 26mm diameter, G13 fittings, includes 3 year factory warranty

4ft LED light tube similar to 36W fluorescent only 58% less electricity
T8, 26mm diameter, G13 fittings, includes 3 year factory warranty

5ft LED light tube similar to 58W fluorescent only 68% less electricity
T8, 26mm diameter, G13 fittings, includes 3 year factory warranty

6ft LED light tube similar to 70W fluorescent only 45% less electricity
T8, 26mm diameter, G13 fittings, includes 3 year factory warranty

Complete Dismy DF50 MVHR system with 6 inlets & 6 outlets for properties below 325m² total floor area